Door Handle Replacement
It's worth it to replace door handles if you don't like the way they look, or if they're difficult to use. With a little patience, you can install an entirely new handle in a short time.
Modern door handles are typically equipped with cover plates that conceal the screws to give them an attractive appearance. If the new handle doesn't already have them connected, you'll have to attach them separately.
Remove the old handle
The door handle isn't only a decorative addition to your home it also serves as a safety feature that allows you to lock and unlock your door. As time passes, the door handle may begin to lose its grip or feel loose. It might also begin to look old and worn. This is a good indication that it's time to replace your door handle.
One of the first indications that your door handle is in need of replacing is if it's becoming difficult to operate. This is an issue because it means that you are unable to no longer lock or unlock your door which could pose a security risk for you and your family.
It is also recommended to replace the handle on your door in the event that it's damaged or broken. A damaged or broken door handle can be extremely dangerous, particularly if your children or elderly family members are unable to open it and could get trapped in the. It's simple to replace a damaged handle on the door.
The majority of modern door handles are a standard size, so they should fit any door. If you're not sure if your new door handle will fit, try removing the old one and measuring its housing holes. This will allow you to buy the right door handle.
It is the easiest method to remove the door handle by unscrewing it from the door. This is usually done using a screw driver. Some door handles have the cover plate, which conceals the screws that mount them. You'll need to remove the cover plate to gain access to the screws. Once you have removed the old handle, make note of the way the spindle is connected to ensure that you can align it when you fit your new one.
You can also remove the door handle by depressing the latch mechanism. You can use a screwdriver to remove the door handle. However, you'll have to locate the tiny latch, which is located on the edge of the trim piece. After you have removed the latch, take off the handle and strike plate. Then remove the latch from the edge of the door.
Removing the Strike Plate
You'll have to replace your latch plate after replacing the handle. This is the plate that holds the hole where the latch of the door hooks when the door is closed. The box that the new handles arrive in will have two options for latch plates: a rectangular one and circular (see the above diagram that outlines the components of a door handle). If your current latch plate has rectangular, swap it over to the circular one so that the latch is able to hook into the strike plate in a way that makes the handle easier to use.
The first step is to unhook the screw that holds the latch plate. These screws are often tight, and will require some force to loosen. It might be beneficial to have a second person assist in this area if it is possible.
Once the screws are removed the latch should slide out of the door easily. If it's stuck or won't move, use a small nail file to scrape around the edges of the latch plate. This can help loosen the plate.
Now you can prepare the new strike plate to be installed. Using the screws made of wood that came with the new handles, screw the latch plate to the inside of the doorjamb. Do not tighten the screws too much as this could damage the strike plate.
If you're unsure whether the latch plate is in its proper position, shut and open the door to see whether it latches and closes correctly. If it doesn't you'll have to adjust the strikeplate up or down, forward or back until the door shuts properly.
If the door is still moving or jiggling, it may be necessary to expand the hole for latching in the strike plate. This is more common with older doors, but could also be caused by wear and tear, hinge mortises that are too shallow or are not sized correctly for the latch, or because of damaged or broken strike plate. If this is the situation, follow the same procedure for adjusting the strike plate, but using a metal file instead of the hammer and chisel.
Removing the Latch
The latch is the angled metal piece that is able to move through the hole in the inner edge of your door. When you turn the handle, it pushes the latch forward which allows you to open the door. It also hooks into an opening in the frame of the door to keep your door closed. If your door wobbles when you close it, replacing the latch could be all you need to fix the issue.
The screws that support the door latch are difficult to locate however, you can use a screwdriver to make an insignificant hole on the trim plate, and then pull the latch off. Once you've removed the trim plate, it'll be easy to remove the latch and the remaining bolts that hold the latch and spindle in place.
If the latch isn't easily removed using a paperclip or tool to take it off the handle mechanism. Insert the item into the slot for the latch that is recessed and then gently twist or jiggle until you feel the handle and latch begin to split. It is possible repeat this process a few times before you can pull the latch out.
After the old latch is removed and the old latch is removed, you should be able to slide the new latch into the slot with no issues. Make sure that the latch is positioned correctly in the slot and lined up with the screw chambers and then use your new screws to secure it to the strike plate and door frame.
Before you install the new handle, be certain to measure your existing backset (the distance from the center of the large hole on the front surface of the door to the edge). Check that the latch size of the new handle is equal to the measurement.
You'll require a new cylinder for your lock if replacing the latch and handle or if your current one is damaged. If you're not changing locks, the new latch will fit in your existing recess and will work just fine with your current keys. Make sure you select an entry point with a rectangular cover plate that match the handles you have.
Remove the cover plate
You can replace your door handles with a modern design of roses and levers to make a difference in the appearance of your house. You can buy complete sets that come with matching escutcheons and privacy adaptor kits.
The first step to replace the door handle inside is to remove the cover plate or rose, which conceals the screws and the mechanism within. Find a release tab on the plate and make use of a flathead screwdriver to pop it off the knob. It may have an opening along one side or be secured by a pin.
When the cover plate is removed, remove the screw that holds the inside handle in place and put it aside. window handles 'll also need to remove the screws that hold the latch and the plates inside, which you can do by loosening them using the help of a Philips screwdriver. Then, remove the inner plates and latch plate from the door and set them aside.
Some doors don't have this gap. If yours isn't allow for a handle, you'll have to make a hole into the door. It's the same procedure as opening a door locked however you'll need to be extra careful not to damage the door or frame.
Installing new door knob screws is necessary after the holes have been made. Make sure you purchase the same size as the old ones, so that you won't have an handle that is either too tight or loose. You'll also need to install a new latch plate and strike rod, which aren't included with the majority of door handle sets.
Amazon's Choice FAERSI 2-piece chrome finish handle sets are a great alternative if you're in search of a high-quality interior door handle replacement set. It's a factory fit and has received a plethora of five-star reviews from delighted customers. It's a great choice to replace worn or damaged door hardware on your Chevy.